LGJ2G820MELA20 Datasheet | Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sized series Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. Addition of 450V rated voltage. pliant to the Ro HS directive (2002/95/EC). Low Profile Low Profile Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current GJ(15) Performance Characteristics - 40 to +105°C (160 to 250V) , - 25 to +105°C (315 to 450V) 200 to 450V 47 to 680µF ± 20% at 120Hz, 20°C 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Tangent of loss angle (tan δ) Rated voltage(V) tan δ (MAX.) 200 to 400 0.15 450 0.20 Measurement frequency : 120Hz, Temperature : 20°C Stability at Low Temperature Rated voltage(V) Impedance ratio ZT/Z20(MAX.) - 25°C/ Z+20°C Z - 40°C/ Z+20°C Measurement frequency : 120Hz - 250 3 12 - 450 8 - Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at...