LKS1V822MESY Datasheet | Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS KS Snap-in Terminal Type, For Audio Equipment, Smaller-sized series Smaller and high-tone quality than KG series TYPE-1 grade. An effect to tone quallity improvement by replacement from a small standard product to use. pliant to the Ro HS directive (2002/95/EC). TYPE -1 Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Performance Characteristics - 40 to +85°C 25 to 100V 680 to 33000µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage, leakage current is not more than 3 CV (µA), [C : Rated Capacitance(µF), V : Voltage ( V ) ] For capacitance of more than 22000µF, add 0.02 for every increase of 1000µF. Rated voltage(V) 25 to 71 - 100 tan δ (MAX.) Measurement frequency : 120Hz, Temperature : 20°C Stability at Low Temperature Rated voltage(V) Impedance ratio ZT/Z20(MAX.) - 25°C/ Z+20°C Z - 40°C/ Z+20°C 25 to 100 4 12 Measurement frequency : 120Hz Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Capacitance change tan δ Leakage current Within ±20% of the initial value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with silver color letter on black sleeve. Drawing Polarity bar Sleeve...