NT3225S Datasheet | Nihon Dempa Kogyo

es 8 Low power supply voltage. (Power supply - Specification Model Item Standard Nominal Frequency (MHz) Supply Voltage Load Current Consumption Output Voltage Frequency Stability Supply Volt Change Aging AFC Charact. NT3225SA 13, 19.2, 19.68, 26 +3.0V DC 10kΩ//10p F 1.5m A max 0.8V (P-P) min (DC coupling - 1) ±2.5×10- 6 max - 30~+75°C ±0.3×10- 6 max/+3.0V±5% ±1.0×10- 6 max/year ±9×10- 6~±15×10- 6/+1.5±1V - 2 voltage: +2.4V DC ±0.1V ~ +3.4V±5%) 3 8 Height 1.0mm max, volume 7mm , weight 24mg (light & small) 8 This is “with AFC” version 8 Low power consumption 8 Surface mount type (This is applicable to reflow soldering) 8 Products are lead-free. These can meet the requirements of re-flow profiling using lead-free solder. Note: Frequency adjustment condition (1) Adjustment is conducted in room temperature (+25±2°C). (2) For adjustment, oscillator is placed on the printed board which has earth pattern. If you need NON-standing spec. for frequency, Supply Voltage & AFC charact etc, please contact us. ∗1 DC-cut capacitor of output is not put in VC-TCXO. Please add DC-cut capacitor (1,000p F) in oscillators output line. ∗2 It is a typical specification. According to the frequency, there is possibility that the specification changes. - Dimensions 3.2±0.2 #4 #3 CRYSTAL OSCILLATORS (mm) PAD NO. CONNECTION #1 VCONT GND OUTPUT Vcc 2.5±0.2 #2 #3 #4 #1 #2 0.9±0.1 Reference land pattern 2.65 2.24±0.2 (0.2 0.2) #1 #2 0.7±0.2 1.2 1.2 0.83±0.1 #4 #3 0.4±0.1 Please access NDK web site (http://.ndk./) for the latest information. .....