RNP-20SxxxF00 Datasheet | Nikkohm

.. POWER SOLUTION - NIKKOHM 30W HIGH POWER RESISTORS RNP20S Features and Applications 35W high power resistors in TO220 style molded package for through-hole (35W) and surface mount (30W). Non-inductive design fits for high frequency applications and high-speed pulse circuits. Low, 3.3 C/W heat resistance from resistor hot spot to flange is presented by thin film metalization technology. Wide, 100mohm to 220ohm resistance range, non-inductive impedance characteristic and pulling heat out through insulated metal tab help circuit designers. Small size and thin profile fit for high-density pact installations. plete thermal conduction, heat dissipation design and vibration durable design will be available. Applications for SW PS, power unit of machine, motor control, drive circuit, automobile, measurements and industrial Dimensional Specifications (mm) Type 000 A M D RNP20S 100 CF 2Y RNP20S 100 CF 2Y Type 010 C dia. . A D C dia. M Data She e Type 000 010 A 10.6 10.6 B 15.0 15.0 C 4.5 4.5 D 1.5 1.5 E 2.7 2.7 F 5.08 5.08 G 0.75 0.75 H 0.5 0.5 J 1.5 1.5 K 19.0 14.0 L 2.7 2.7 M 3.6 3.6 N 15.0 2.0 Ordering Information Designation RNP20SC221F000 RNP20SC101F010 RNP20SAR1J000 RNP20SC500F000 Type RNP20S RNP20S RNP20S RNP20S TC C(50ppm) C(50ppm) A(100ppm) C(50ppm) Resistance 220ohm 100ohm 0.1ohm 50ohm Tolerance F(1%) F(1%) J(5%) F(1%) Lead forming 000 (through-hole) 010 (smd) 000 (through-hole) 010 (smd) (1) Insulating material is not necessary between flange and resistors, flange and resistor is separated by alumina substrate. (2) At surface mount soldering, temperature profile in tab shall not exceed 220C. (3) Using heat conduction grease on surface of flange is remended. (4) Heat resistance between resistor and tab is 3.3 C/W. Heat design will be done, as resistor temperature shall be under 155C in operation. (5) 0.1% tolerance resistors and over 220ohm resistance are...