CF5017 Datasheet | Nippon Precision Circuits

CF5017 series 3rd Overtone Crystal Oscillator Module ICs .. OVERVIEW The CF5017 series are 3rd overtone crystal oscillator ICs. Devices are available that provide 3rd overtone oscillation in the range 30MHz to 80MHz. The oscillator circuit is prised of feedback resistors with good temperature characteristics and oscillation capacitors with excellent frequency response for stable 3rd overtone oscillation. Also, the chip layout is optimized, resulting in a large reduction in chip surface area pared to existing devices. Features 2.7 to 5.5V operating supply voltage range 30MHz to 80MHz oscillation frequency range (varies with version) - 40 to 85°C operating temperature range Oscillation capacitors built-in - CG = 8p F, CD = 15p F Inverter amplifier feedback resistor built-in Standby function - High impedance in standby mode, oscillator stops Low standby current - Power-saving pull-up resistor built-in I I I I I f O output frequency (oscillation frequency) Output drive capability - 8m A (VDD = 2.7V) - 16m A (VDD = 4.5V) CMOS output duty level (1/2VDD) 50 ± 5% output duty (at 1/2VDD) 30p F output load Molybdenum-gate CMOS process Chip form (CF5017AL×) SERIES CONFIGURATION Operating supply voltage range [V] 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 3.6 Remended operating frequency range1 [MHz] 3V operation 30 to 36 36 to 50 44 to 60 53 to 80 5V operation 30 to 44 40 to 60 60 to 80 - 0.25 0.50 8 CF5017ALC CF5017ALD 0.75 1.00 15 3.5 3.0 Built-in capacitance [p F] gm ratio CG CD Rf [kΩ] 3.5 3.5 Version CF5017ALA CF5017ALB 1. The remended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscillator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the oscillation characteristics of ponents must be carefully evaluated. ORDERING INFORMATION Device CF5017AL×- 2...