CF5018 Datasheet | Nippon Precision Circuits

CF5018 series 2.5V 3rd Overtone Crystal Oscillator Module ICs .. OVERVIEW The CF5018 series are crystal oscillator ICs that operate from 2.5V. Devices are available that provide 3rd overtone oscillation in the range 30MHz to 80MHz. They are optimized for 2.5V operation, resulting in stable oscillator startup characteristics and output duty stability. They feature a large reduction in chip surface area pared to existing devices, making possible the construction of small-sized crystal oscillator. Features 2.25 to 2.75V operating supply voltage range 30MHz to 80MHz oscillation frequency range (varies with version) - 40 to 85°C operating temperature range Oscillation capacitors CG, CD built-in Inverter amplifier feedback resistor built-in Standby function - High impedance in standby mode, oscillator stops Low standby current - Power-saving pull-up resistor built-in I I I I I I I f O output frequency (oscillation frequency) 8m A output drive capability (VDD = 2.25V) CMOS output duty level (1/2VDD) 50 ± 5% output duty (at 1/2VDD) 30p F output load Molybdenum-gate CMOS process Chip form (CF5018AL×) SERIES CONFIGURATION Version CF5018ALA CF5018ALB CF5018ALC CF5018ALD CF5018ALE 2.25 to 2.75 Operating supply voltage range [V] Remended operating frequency range1 [MHz] 30 to 36 36 to 40 40 to 50 50 to 60 60 to 80 Built-in capacitance [p F] gm ratio CG 0.25 0.50 15 0.75 1.00 1.50 10 8 3.5 3.0 3.5 CD Rf [kΩ] 4.7 3.5 1. The remended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscillator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the oscillation characteristics of ponents must be carefully evaluated. ORDERING INFORMATION Device CF5018AL×- 2 Package Chip form SEIKO NPC CORPORATION - 1 CF5018 series PAD LAYOUT (Unit: µm) .. (720,730)...