PFCU20 Datasheet | Nippon Pulse

Tin-Can Steppers connector insertion direction Specifications Specification Excitation Mode Step Angle Steps Per Revolution- Rated Voltage Resistance1 Inductance1 Max. Torque Starting Pulse Rate1- Slewing Pulse Rate1- Operating Temp. Range Temperature Rise- Weight Gear Ratio, Backlash Unit ˚ V Ω m H m N- m pps pps ˚C ˚C g PFCU20 Full-step (2-2) 0.9 400 12 160 ±7% 59 (1 Vrms, 1 Khz) 10 650 or more (with no load) 800 or more (with no load) -10 to +50 70 25 1/10, 7˚ or less All tin-can motor specifications are based on full-step constant voltage operation Magnet type: Neodymium Note 1: Supply voltage 12V ±2% and at a temperature of 20˚C ±2% and relative humidity 65% ±20%. Note 2: Stated terminal voltage is with supply voltage 12V. Note 3: Stated temperature rise is at the time of saturation. Torque m N- m Torque Curve- 12.5 Normal Gear Strength 10.0 Pull-out Torque 5.0 Pull-in Torque 0 200 400 600 800 1000 Pulse Ra(tepps) Connector Applicable Housing: SHR-04V-S Applicable Contact: SSH-003T-P0.2-H Applicable Wire: AWG 32 to 28 (outer diameter of covered wire: 0.4 to 0.8 mm) Y o u r P a r t n e r I n M o t i o n C o n t r o l...