nRF905 Datasheet | Nordic Semiconductor

n RF905 Single chip 433/868/915MHz Transceiver Product Specification Key Features - - - - - - - - - - - - - - - True single chip GFSK transceiver in a small 32 pin package (32L QFN 5x5mm) Shock Burst™ mode for low power operation Power supply range 1.9 to 3.6 V Multi channel operation - ETSI/FCC patible Channel switching time <650µs Extremely low cost Bill of Material (BOM) No external SAW filter Adjustable output power up to 10d Bm Carrier detect for "listen before transmit" protocols Data Ready signal when a valid data packet is received or transmitted Address Match for detection of ining packet Automatic retransmission of data packet Automatic CRC and preamble generation Low supply current (TX), typical 9m A @ -10d Bm output power Low supply current (RX), typical 12.5m A Applications - - - - - - - - - Wireless data munication Alarm and security system Home automation Remote control Surveillance Automotive Telemetry Keyless entry Toys All rights reserved. Reproduction in whole or in part is prohibited without the prior written permission of the copyright holder. April 2008 n RF905 Product Specification Liability disclaimer Nordic Semiconductor ASA reserves the right to make changes without further notice to the product to improve reliability, function or design. Nordic Semiconductor ASA does not assume any liability arising out of the application or use of any product or circuits described herein. All application information is advisory and does not form part of the specification. Limiting values Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the specifications are not implied. Exposure to limiting values for extended periods may affect device reliability. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these...