Datasheet4U Logo Datasheet4U.com

M25P05-A - 512 Kbits of flash memory

Datasheet Summary

Description

.

.

.

Features

  • 512 Kbits of flash memory.
  • Page program (up to 256 bytes) in 1.4 ms (typical).
  • Sector erase (256 Kbits) in 0.65 s (typical).
  • Bulk erase (512 Kbits) in 0.85 s (typical).
  • 2.3 to 3.6 V single supply voltage.
  • SPI bus compatible serial interface.
  • 50 MHz clock rate (maximum).
  • Deep power-down mode 1 µA (typical).
  • Electronic signatures.
  • JEDEC standard two-byte signature (2010h).
  • RES instruction, one-byte, signature (05h), for backward compa.

📥 Download Datasheet

Datasheet preview – M25P05-A

Datasheet Details

Part number M25P05-A
Manufacturer Numonyx
File Size 776.22 KB
Description 512 Kbits of flash memory
Datasheet download datasheet M25P05-A Datasheet
Additional preview pages of the M25P05-A datasheet.

📁 Similar Datasheet

  • M25P05-A - 512 Kbit/ Low Voltage/ Serial Flash Memory (STMicroelectronics)
  • M25P05 - 512 Kbit/ Low Voltage/ Serial Flash Memory (STMicroelectronics)
  • M25P10 - 1 Mbit Low Voltage Paged Flash Memory With 20 MHz Serial SPI Bus Interface (STMicroelectronics)
  • M25P10-A - 1 Mbit/ Low Voltage/ Serial Flash Memory With 25 MHz SPI Bus Interface (STMicroelectronics)
  • M25P10A - 1Mb 3V Serial Flash Embedded Memory (Micron)
  • M25P128 - 128 Mbit (Multilevel) Low Voltage Serial Flash Memory (ST Microelectronics)
  • M25P16 - 16-Mbit Low Voltage Serial Flash Memory (STMicroelectronics)
  • M25P16 - Flash Embedded Memory (Micron)
  • M25P16-V6D11 - Flash Embedded Memory (Micron)
  • M25P16-VMC6G - Flash Embedded Memory (Micron)
Other Datasheets by Numonyx
  • M25P128 - serial flash memory
  • M25P16 - Flash Memory
  • M25P32 - serial Flash memory
  • M25PE80 - page-erasable serial flash memory
  • M25PX16 - 16-Mbit dual I/O 4-Kbyte subsector erase / serial Flash memory
  • M25PX32 - serial Flash memory
  • M25PX64 - serial Flash memory

Full PDF Text Transcription

Click to expand full text
M25P05-A 512-Kbit, serial flash memory, 50 MHz SPI bus interface Features ■ 512 Kbits of flash memory ■ Page program (up to 256 bytes) in 1.4 ms (typical) ■ Sector erase (256 Kbits) in 0.65 s (typical) ■ Bulk erase (512 Kbits) in 0.85 s (typical) ■ 2.3 to 3.6 V single supply voltage ■ SPI bus compatible serial interface ■ 50 MHz clock rate (maximum) ■ Deep power-down mode 1 µA (typical) ■ Electronic signatures – JEDEC standard two-byte signature (2010h) – RES instruction, one-byte, signature (05h), for backward compatibility ■ More than 100,000 erase/program cycles per sector ■ More than 20 years data retention ■ ECOPACK® packages available SO8 (MN) 150 mil width VFQFPN8 (MP) (MLP8) TSSOP8 (DW) UFDFPN8 (MB) 2 x 3 mm April 2008 Rev 11 1/52 www.numonyx.
Published: |