Datasheet4U Logo Datasheet4U.com

ML9090-01- - LCD Driver with Key Scanner and RAM

General Description

The ML9090-01 and ML9090-02 are LCD drivers that contain internal RAM and a key scan function.

They are best suited for car audio displays.

Since 1-bit data of the display RAM corresponds to the light-on or light-off of 1-dot of the LCD panel (a bit map system), a flexible display is possible.

Key Features

  • Logic voltage: VDD 2.7 to 5.5 V.
  • LCD drive voltage: VBI 6 to 16 V (positive voltage).
  • 80 segment outputs,10 common outputs for ML9090-01 and 18 common outputs for ML909002.
  • Built-in bit-mapped RAM (ML9090-01: 80.
  • 10 = 800 bits, ML9090-02: 80.
  • 18 = 1440 bits).
  • 4-pin serial interface with CPU: CS, CP, DI/O, KREQ.
  • Built-in LCD drive bias resistors.
  • Built-in voltage doubler and tripler circuits.
  • Built-in 5.
  • 5 key.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML9092-01 LCD Driver LAPIS
ML9092-02 LCD Driver LAPIS
ML9092-03 LCD Driver LAPIS
ML9092-04 LCD Driver LAPIS
ML9098B Clock IC LAPIS

Other Datasheets by OKI Electric

Part Number Description
ML9090-02 LCD Driver with Key Scanner and RAM
ML9040 DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-Axx DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-Bxx DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9041 DOT MATRIX LCD CONTROLLER DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PEDL9090-02 ¡ Semiconductor ML9090-01,-02 LCD Driver with Key Scanner and RAM This version: Jan. 2000 Previous version: Nov. 1998 el Pr y ar in im GENERAL DESCRIPTION The ML9090-01 and ML9090-02 are LCD drivers that contain internal RAM and a key scan function. They are best suited for car audio displays. Since 1-bit data of the display RAM corresponds to the light-on or light-off of 1-dot of the LCD panel (a bit map system), a flexible display is possible. A single chip can implement a graphic display system of a maximum of 80 ¥ 16 dots (80 ¥ 8 dots for the ML9090-01, 80 ¥ 16 dots for the ML9090-02) and an arbitrator display system of 80 ¥ 2 dots. Since containing voltage multipliers, the ML9090-01 and ML9090-02 require no power supply circuit to drive the LCD.