Datasheet4U Logo Datasheet4U.com

MSM7716 - Single Rail Linear CODEC

General Description

The MSM7716 is a single-channel CODEC CMOS IC for voice signals that contains filters for linear A/D and D/A conversion.

Key Features

  • Single power supply.
  • Low power consumption Operating mode Power down mode.
  • Digital signal input/output interface.
  • Sampling frequency(fs).
  • Transmission clock frequency.
  • Filter characteristics : +2.7 V to +3.6 V : : : : : : 24 mW Typ. 0.05 mW Typ. 14-bit serial code in 2's complement format 4 to 16 kHz fs.
  • 14 min. , 2048 kHz max. when fs = 8 kHz, complies with ITU-T Recommendation G. 714.
  • Built-in PLL eliminates a master clock.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MSM7717-01 Single Rail CODEC LAPIS
MSM7704-01 2ch Single Rail CODEC LAPIS
MSM74017 Modulator / Demodulator for Modem Function in the Cellular Mobile Phone OKI Semiconductor
MSM7502 Multi-Function PCM CODEC OKI
MSM7507-xx Single Rail CODEC OKI

Other Datasheets by OKI Electric

Part Number Description
MSM7712 Wireless LAN Baseband Controller
MSM7715 Multi-Function Telecommunication LSI
MSM7717 Single Rail CODEC
MSM7718-01 Echo Canceler with ADPCM CODEC
MSM7702 Single Rail CODEC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
E2U0043-28-82 ¡ Semiconductor MSM7716 ¡ Semiconductor Single Rail Linear CODEC This version: Aug. 1998 MSM7716 Previous version: Nov. 1996 GENERAL DESCRIPTION The MSM7716 is a single-channel CODEC CMOS IC for voice signals that contains filters for linear A/D and D/A conversion. Designed especially for a single-power supply and low-power applications, the device is optimized for applications for the analog interfaces of audio signal processing DSPs and digital wireless systems. The analog output signal can directly drive a ceramic type handset receiver. In addition, levels for analog outputs can be set by external control.