Oki Electric Industry MBF9045BB
The MBF9045BB is the SAW antenna duplexer for the frequency range of 700 to 1000 MHz. This SAW Duplexer integrates RF filters at Tx and Rx side, and matching circuit into PKG. This helps to save the space and weight greatly in the target application such as mobile telephone.| Part No. | MBF9045BB |
|---|---|
| Datasheet | MBF9045BB Download |
| Manufacturer | Oki Electric Industry |
| Description | SAW Antenna Duplexer |
| Buy | Stock & Price |
GENERAL DESCRIPTION
This SAW Duplexer has very low insertion loss by using high quality package. Due to high harmonics characteristics, total number of components at RF circuit can be minimized. Thanks to high isolation performance, high sensitivity can be expected. Low insertion loss at Tx saves the power consumption of mobile telephone which prolong the battery life.FEATURES
● Complying Standard AMPS, IS-95, IS-136● Small package: 5mm x 5mm & less than 1.8 mm in height
● PKG I/O Impedance: 50 Ω PRODUCT
DESCRIPTION
Package Type MBF9045BB Rx 45B Y XX X ANT Tx Construction Glue Cap Wire Chip Package Die Paste Cross-section of MBF9045BB 1/10 FEDW9045BB-01 1 Semiconductor MBF9045BB PIN ASSIGNMENT &DESCRIPTION
9 8 7 10 11 12 45B YXXX 1 1 2 2 3 3 6 5 4 Top view 10 11 12 13 4 5 6 Bottom view 9 8 7 CONNECTION 2: ANT (Antenna Pin) 5: Tx (Transmitting Terminal Pin) 11: Rx (Receiving Terminal Pin) 13: INDEX Mark (should not be soldered ) Others: GND (Ground Pin) 2/10 FEDW9045BB-01 1 Semicondu...
