Datasheet4U Logo Datasheet4U.com

NCV7518 - Hex Low side MOSFET Pre driver

General Description

32 PIN QFN EXPOSED PAD PACKAGE Label Description FLTREF Analog Fault Detect Threshold: 5 V Compliant DRN0 DRN5 Analog Drain Feedback GAT0 GAT5 Analog Gate Drive: 5 V Compliant RSTB Digital Master Reset Input: 3.3 V/5 V (TTL) Compatible ENB Digital Master Enable Input:

Key Features

  • 16-bit SPI with Parity and Frame Error Detection.
  • 3.3 V/5 V Compatible Parallel and Serial Control Inputs.
  • 3.3 V/5 V Compatible Serial Output Driver.
  • Reset and Enable Inputs.
  • Open-drain Fault Flag.
  • Priority Encoded Diagnostics with Latched Unique Fault Type Data.
  • Shorted Load, Short to GND.
  • Open Load with Fast Charge Option.
  • On and Off State Pulsed Mode Diagnostics.
  • Ratiometric Diagnostic References and Cu.

📥 Download Datasheet

Datasheet Details

Part number NCV7518
Manufacturer ON Semiconducto
File Size 461.20 KB
Description Hex Low side MOSFET Pre driver
Datasheet download datasheet NCV7518 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV7518A Hex Low side MOSFET Pre driver ON Semiconductor
NCV7510 FlexMOS Programmable Peak and Hold PWM MOSFET Predriver ON Semiconductor
NCV7512 Quad Low-Side Pre-driver ON Semiconductor
NCV7513 Hex Low Side MOSFET Pre-Driver ON Semiconductor
NCV7513B Hex Low-Side MOSFET Pre-Driver ON Semiconductor

Other Datasheets by ON Semiconducto

Part Number Description
NCV7383 Transceiver
NCV7424 Four Channel LIN Transceiver
NCV7719 Octal Half-Bridge Driver
NCV896530 Buck Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCV7518 FLEXMOS] Hex Low‐side MOSFET Pre‐driver The NCV7518 programmable six channel low-side MOSFET pre-driver is one of a family of FLEXMOS automotive grade products for driving logic-level MOSFETs. The product is controllable by a combination of serial SPI and parallel inputs. The device offers 3.3 V/ 5 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5 V. An internal power-on reset provides controlled power up. A reset input allows external re-initialization and an enable input allows all outputs and diagnostics to be simultaneously disabled. Each channel independently monitors its external MOSFET’s drain voltage for fault conditions.