1SMF16BT3G Datasheet | onsemi

Features : http://onsemi. - - - - - - - - - - Stand- off Voltage: 16 Volt Peak Power - 175 Watts @ 1 ms Maximum Clamp Voltage @ Peak Pulse Current Low Leakage Response Time is Typically < 1 ns IEC61000- 4- 2 Level 4 ESD Protection Low Profile - Maximum Height of 1.0 mm Small Footprint Cathode Indicated by Polarity Band Pb- Free Package is Available PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSOR 175 WATT PEAK POWER 1 1: CATHODE 2: ANODE Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic LEAD FINISH: 100% Matte Sn (Tin) MOUNTING POSITION: Any QUALIFIED MAX REFLOW TEMPERATURE: 260°C SOD- 123FL CASE 498 PLASTIC Device Meets MSL 1 Requirements Epoxy Meets UL 94, V- 0 MARKING DIAGRAM 1 CATHODE MLU D 2 ANODE MLU D = Specific Device Code = Date Code ORDERING INFORMATION Device 1SMF16BT1 1SMF16BT3 1SMF16BT3G Package SOD- 123FL SOD- 123FL SOD- 123FL (Pb- Free) Shipping† 3,000/Tape & Reel 10,000/Tape & Reel 10,000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor ponents Industries, LLC, 2004 February, 2004 - Rev. 1 Publication Order Number: 1SMF16B/D 1SMF16BT1, 1SMF16BT3, 1SMF16BT3G MAXIMUM RATINGS Rating Maximum Ppk Dissipation @ TA = 25°C, (PW- 10/1000 ms) (Note 1) Maximum Ppk Dissipation @ TA = 25°C, (PW- 8/20 ms) (Note 2) Operating and Storage Temperature Range 1. Non- repetitive current pulse at TA = 25°C, per waveform of Figure 3. 2. Non- repetitive current pulse at TA = 25°C, per waveform of Figure 4. I Symbol Ppk Ppk TJ, Tstg Value 175 1000 - 55 to +150 Unit W W °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol IPP VC VRWM IR VBR IT IF VF Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF...