Datasheet4U Logo Datasheet4U.com

74LS247 - LOW POWER SCHOTTKY

Key Features

  • a lamp test input and have full ripple-blanking input/output controls. An automatic leading and/or trailing-edge zero-blanking control (RBI and RBO) is incorporated and an overriding blanking input (BI) is contained which may be used to control the lamp intensity by pulsing or to inhibit the output’s lamp test may be performed at any time when the BI/RBO node is at high level. Segment identification and resultant displays are shown below. Display pattern for BCD input counts above 9 are unique s.

📥 Download Datasheet

Datasheet Details

Part number 74LS247
Manufacturer onsemi
File Size 125.70 KB
Description LOW POWER SCHOTTKY
Datasheet download datasheet 74LS247 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LS247 8CD-to-Seven-Segment Decoders/Drivers Hitachi Semiconductor
74LS240 Octal 3-STATE Buffer/Line Driver/Line Receiver Fairchild Semiconductor
74LS240 Octal Buffers/Line Drivers/Line Receivers Hitachi Semiconductor
74LS240 Octal TRI-STATE Buffers/Line Drivers/Line Receivers National Semiconductor
74LS240 LSTTL eight-Buffer / Bus Driver BDTIC

Other Datasheets by onsemi

Part Number Description
74LS240 LOW POWER SCHOTTKY
74LS244 LOW POWER SCHOTTKY
74LS245 Octal Bus Transceivers
74LS221 Dual Monostable Multivibrators
74LS251 LOW POWER SCHOTTKY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN74LS247 BCD-to-Seven-Segment Decoders/Drivers The SN74LS247 is a BCD-to-Seven-Segment Decoder/Drivers. The LS247 composes the and with the tails. The LS247 has active-low outputs for direct drive of indicators. The LS247 features a lamp test input and have full ripple-blanking input/output controls. An automatic leading and/or trailing-edge zero-blanking control (RBI and RBO) is incorporated and an overriding blanking input (BI) is contained which may be used to control the lamp intensity by pulsing or to inhibit the output’s lamp test may be performed at any time when the BI/RBO node is at high level. Segment identification and resultant displays are shown below. Display pattern for BCD input counts above 9 are unique symbols to authenticate input conditions. http://onsemi.