AMIS-30663 Datasheet | onsemi

High Speed CAN Transceiver Introduction The AMIS- 30663 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The digital interface level is powered from a 3.3 V supply providing true I/O voltage levels for 3.3 V CAN controllers. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide mon- mode voltage range of the receiver inputs, the AMIS- 30663 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals. Key Features - Fully patible with the “ISO 11898- 2” Standard - Certified “Authentication on CAN Transceiver Conformance (d1.1)” - High Speed (up to 1 Mbit/s) - Ideally Suited for 12 V and 24 V Industrial and Automotive Applications - Low EME mon- mode- choke is No Longer Required - Differential Receiver with Wide mon- mode Range (±35 V) for High EMS - No Disturbance of the Bus Lines with an Un- powered Node - Transmit Data (Tx D) Dominant Time- out Function - Thermal Protection - Bus Pins Protected Against Transients in an Automotive Environment - Short Circuit Proof to Supply Voltage and Ground - Logic Level Inputs patible with 3.3 V Devices - ESD Protection Level for CAN Bus up to ±8 k V - This is a Pb- Free Device http://onsemi. PIN ASSIGNMENT Tx D GND VCC Rx D AMIS 30663 V33 CANH CANL VREF (Top View) Table 1. Ordering Information Container Part Number AMIS30663CANG2G...