ASM3P2870A Datasheet PDF (Low Power Peak EMI Reducing Solution)

ASM3P2870A - Low Power Peak EMI Reducing Solution

Description

modulator designed specifically for a wide range of clock frequencies.

The ASM3P2870A reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of all clock dependent signals.

Features

Generates an EMI Optimized Clock Signal at the Output.
Integrated Loop Filter Components.
Operates with a 3.3 V / 2.5 V Supply.
Operating Current less than 4 mA.
Low Power CMOS Design.
Input Frequency Range: 13 MHz to 30 MHz for 2.5 V 13 MHz to 30 MHz for 3.3 V.
Generates a 1X Low EMI Spread Spectrum Clock of the Input Frequency.
Frequency Deviation: ±0.75% (Typ) @ 22 MHz Input Frequency.
Available in 6.
pin.

Datasheet Details

Part number	ASM3P2870A
Manufacturer	ON Semiconductor
File Size	120.90 KB
Description	Low Power Peak EMI Reducing Solution
Datasheet	ASM3P2870A Datasheet
Additional preview pages of the ASM3P2870A datasheet.

📁 Similar Datasheet

ASM3P2870A - Low Power Peak EMI Reducing Solution (Alliance Semiconductor Corporation)

ASM3P2872A - Low Power Peak EMI Reducing Solution (Alliance Semiconductor Corporation)

ASM3P2879A - Low Power Peak Reducing EMI Solution (Alliance Semiconductor Corporation)

ASM3P2811A - (ASM3P281xA/B) Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

ASM3P2811B - (ASM3P281xA/B) Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

ASM3P2812A - (ASM3P281xA/B) Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

ASM3P2812B - (ASM3P281xA/B) Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

ASM3P2814A - (ASM3P281xA/B) Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

ASM3P2814B - (ASM3P281xA/B) Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

ASM3P2821B - Low Power EMI Reduction IC (Alliance Semiconductor Corporation)

Full PDF Text Transcription

Click to expand full text

ASM3P2870A Low Power Peak EMI Reducing Solution Description The ASM3P2870A is a versatile spread spectrum frequency modulator designed specifically for a wide range of clock frequencies. The ASM3P2870A reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of all clock dependent signals. The ASM3P2870A allows significant system cost savings by reducing the number of circuit board layers, ferrite beads and shielding that are traditionally required to pass EMI regulations. The ASM3P2870A uses the most efficient and optimized modulation profile approved by the FCC and is implemented by using a proprietary all digital method.

Published: Feb 6, 2016 |