Datasheet4U Logo Datasheet4U.com

CAT25010 - SPI Serial CMOS EEPROM

General Description

The CAT25010/20/40 are a EEPROM Serial 1/2/4

internally organized as 128x8/256x8/512x8 bits.

byte page write buffer and support the Serial Peripheral Interface (SPI) protocol.

The device is enabled through a Chip Select (CS) input.

Key Features

  • 20 MHz (5 V) SPI Compatible.
  • 1.8 V to 5.5 V Supply Voltage Range.
  • SPI Modes (0,0) & (1,1).
  • 16.
  • byte Page Write Buffer.
  • Self.
  • timed Write Cycle.
  • Hardware and Software Protection.
  • Block Write Protection.
  • Protect 1/4, 1/2 or Entire EEPROM Array.
  • Low Power CMOS Technology.
  • 1,000,000 Program/Erase Cycles.
  • 100 Year Data Retention.
  • Industrial and Extended Temperature Range.

📥 Download Datasheet

Datasheet Details

Part number CAT25010
Manufacturer onsemi
File Size 358.06 KB
Description SPI Serial CMOS EEPROM
Datasheet download datasheet CAT25010 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CAT25010 1K/2K/4K SPI Serial CMOS EEPROM Catalyst Semiconductor
CAT25020 1K/2K/4K SPI Serial CMOS EEPROM Catalyst Semiconductor
CAT25040 1K/2K/4K SPI Serial CMOS EEPROM Catalyst Semiconductor
CAT25080 (CAT25080 / CAT25160) 8-Kb and 16-Kb SPI Serial CMOS EEPROM Catalyst Semiconductor
CAT25 Thick Film Chip Resistor Arrays Bourns Electronic Solutions

Other Datasheets by onsemi

Part Number Description
CAT25020 SPI Serial CMOS EEPROM
CAT25040 SPI Serial CMOS EEPROM
CAT25080 8Kb SPI Serial CMOS EEPROM
CAT25128 128-Kb SPI Serial CMOS EEPROM
CAT25160 16Kb SPI Serial CMOS EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EEPROM Serial 1/2/4-Kb SPI CAT25010, CAT25020, CAT25040 Description The CAT25010/20/40 are a EEPROM Serial 1/2/4−Kb SPI devices internally organized as 128x8/256x8/512x8 bits. They feature a 16−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25010/20/40 device. These devices feature software and hardware write protection, including partial as well as full array protection. Features • 20 MHz (5 V) SPI Compatible • 1.8 V to 5.