Datasheet4U Logo Datasheet4U.com

CAT25M02 - 2Mb SPI Serial CMOS EEPROM

Description

The CAT25M02 is a 2M

bit Serial CMOS EEPROM device internally organized as 256Kx8 bits.

Features

  • a 256.
  • byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25M02 device. The device features software and hardware write protection, including partial as well as full array protection. On.
  • Chip ECC (Error Correction Code.

📥 Download Datasheet

Datasheet Details

Part number CAT25M02
Manufacturer onsemi
File Size 121.26 KB
Description 2Mb SPI Serial CMOS EEPROM
Datasheet download datasheet CAT25M02 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CAT25 Thick Film Chip Resistor Arrays Bourns Electronic Solutions
CAT25 Thick Film Chip Resistor Arrays Bourns Electronic
CAT25010 1K/2K/4K SPI Serial CMOS EEPROM Catalyst Semiconductor
CAT25020 1K/2K/4K SPI Serial CMOS EEPROM Catalyst Semiconductor
CAT25040 1K/2K/4K SPI Serial CMOS EEPROM Catalyst Semiconductor

Other Datasheets by onsemi

Part Number Description
CAT25M01 1Mb SPI Serial CMOS EEPROM
CAT25010 SPI Serial CMOS EEPROM
CAT25020 SPI Serial CMOS EEPROM
CAT25040 SPI Serial CMOS EEPROM
CAT25080 8Kb SPI Serial CMOS EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CAT25M02 2 Mb SPI Serial CMOS EEPROM Description The CAT25M02 is a 2M−bit Serial CMOS EEPROM device internally organized as 256Kx8 bits. This features a 256−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25M02 device. The device features software and hardware write protection, including partial as well as full array protection. On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. Features • 5 / 10 MHz SPI Compatible • Supply Voltage Range: 1.7 V to 5.
Published: |