CAT3614 Datasheet | onsemi

4-Channel 1-Wire LED Driver in 3 x 3 mm Package Description The CAT3614 is a high efficiency 1x/1.5x fractional charge pump with programmable dimming current in four LED channels. To ensure uniform brightness in LCD backlight applications, each LED channel delivers an accurate regulated current. Low noise and input ripple is achieved by operating at a constant switching frequency of 1 MHz which allows the use of small external ceramic capacitors. The 1x/1.5x fractional charge pump supports a wide range of input voltages from 3 V to 5.5 V with efficiency up to 91%, and is ideal for Li- Ion battery powered devices. The EN/DIM logic input provides a 1- wire EZDimt interface for dimming control of the LEDs. When enabled, a series of clock pulses reduces the LED brightness in 1 m A steps on each negative going edge. Currents from 0 m A to 31 m A are supported. The device is available in the tiny 12- pad TDFN 3 x 3 mm package with a max height of 0.8 mm. Features - Drives up to 4 LED Channels - 1- wire EZDimt Programmable LED Current - Accurate 1 m A Dimming Level - Power Efficiency up to 91% - Fractional Pump 1x/1.5x - Low Noise Input Ripple - Fixed High Frequency Operation 1 MHz - “Zero” Current Shutdown Mode - Soft Start and Current Limiting - Short Circuit Protection - Thermal Shutdown Protection - TDFN 12- pad 3 mm x 3 mm Package - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant Applications - LCD Display Backlight - Cellular Phones - Digital Still Cameras - Handheld Devices http://onsemi. TDFN- 12 HV2 SUFFIX CASE 511AN PIN CONNECTIONS C1+ C1- C2-...