CAT5133 Datasheet PDF - ON Semiconductor 16-Volt Digital Potentiometer Specs

CAT5133 - 16-Volt Digital Potentiometer

Datasheet Summary

Description

EEPROM memory and control logic to operate in a similar manner to a mechanical potentiometer.

The digital ponentiometer consists of a series of resistive elements connected between two externally accessible end points.

Features

Single Linear Digital Potentiometer with 128 Taps.
End-to-End Resistance of 10 kW, 50 kW or 100 kW.
2-wire Interface.
Fast Up/Down Wiper Control Mode.
Non-volatile Wiper Setting Storage.
Automatic Wiper Setting Recall at Power.
up.
Digital Supply Range (VCC): 2.7 V to 5.5 V.
Analog Supply Range (V+): +8 V to +16 V.
Low Standby Current: 15 mA.
100 Year Wiper Setting Memory.
Industrial Temperature Range:.
40C to +85C.
10.

Datasheet Details

Part number	CAT5133
Manufacturer	ON Semiconductor
File Size	178.56 KB
Description	16-Volt Digital Potentiometer
Datasheet	CAT5133 Datasheet
Additional preview pages of the CAT5133 datasheet.

📁 Similar Datasheet

CAT5133 - Digitally Programmable Potentiometer (Catalyst Semiconductor)

CAT513 - 8-Bit Dual Digital POT (Catalyst Semiconductor)

CAT5132 - 16 Volt Digitally Programmable Potentiometer (Catalyst Semiconductor)

CAT511 - 8-Bit Digital POT with Independent Reference Inputs (Catalyst Semiconductor)

CAT5110 - (CAT5110 - CAT5125) Digitally Programmable Potentiometers (Catalyst Semiconductor)

CAT5111 - 100-Tap Digitally Programmable Potentiometer (Catalyst Semiconductor)

CAT5112 - 32-Tap Digitally Programmable Potentiometer (DPP) (Catalyst Semiconductor)

CAT5113 - 100-Tap Digitally Programmable Potentiometer (Catalyst Semiconductor)

CAT5114 - 32-Tap Digitally Programmable Potentiometer (DPP) (Catalyst Semiconductor)

CAT5115 - 32-Tap Digitally Programmable Potentiometer (Catalyst Semiconductor)

Full PDF Text Transcription

Click to expand full text

CAT5133 16 Volt Digital Potentiometer (POT) with 128 Taps and an Increment Decrement Interface Description The CAT5133 is a high voltage digital POT integrated with EEPROM memory and control logic to operate in a similar manner to a mechanical potentiometer. The digital ponentiometer consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. A 7-bit wiper control register (WCR) independently controls the wiper tap switches for the digital potentiometer. Associated with the control register is a 7-bit nonvolatile memory data register (DR) used for storing the wiper settings.

Published: Oct 2, 2022 |