CAT5401 - Quad Digital Potentiometer

Datasheet Summary

Description

The CAT5401 is four digital POTs integrated with control logic and 16 bytes of NVRAM memory.

Each digital POT consists of a series of 63 resistive elements connected between two externally accessible end points.

ON Semiconductor

📥 Download Datasheet

Datasheet Details

Part number	CAT5401
Manufacturer	ON Semiconductor
File Size	191.56 KB
Description	Quad Digital Potentiometer
Datasheet	CAT5401 Datasheet
Additional preview pages of the CAT5401 datasheet.

📁 Similar Datasheet

CAT5401 - Quad Digitally Programmable Potentiometers (Catalyst Semiconductor)
CAT5409 - Quad Digitally Programmable Potentiometers (Catalyst Semiconductor)
CAT5411 - Dual Digitally Programmable Potentiometers (Catalyst Semiconductor)
CAT5419 - Dual Digitally Programmable Potentiometer (Catalyst Semiconductor)
CAT504 - 8-Bit Quad DACpot (Catalyst Semiconductor)
CAT511 - 8-Bit Digital POT with Independent Reference Inputs (Catalyst Semiconductor)
CAT5110 - (CAT5110 - CAT5125) Digitally Programmable Potentiometers (Catalyst Semiconductor)
CAT5111 - 100-Tap Digitally Programmable Potentiometer (Catalyst Semiconductor)
CAT5112 - 32-Tap Digitally Programmable Potentiometer (DPP) (Catalyst Semiconductor)
CAT5113 - 100-Tap Digitally Programmable Potentiometer (Catalyst Semiconductor)

Other Datasheets by ON Semiconductor

CAT5409 - Quad Digital Potentiometer
CAT5411 - Dual Digital Potentiometer
CAT5419 - Dual Digital Potentiometer
CAT5110 - 32-tap Digital Potentiometers
CAT5111 - 100-Tap Digitally Programmable Potentiometer
CAT5112 - 32-tap Digital Potentiometer
CAT5113 - 100-Tap Digitally Programmable Potentiometer
CAT5114 - 32-Tap Digitally Potentiometer

Full PDF Text Transcription

Click to expand full text

CAT5401 Quad Digital Potentiometer (POT) with 64 Taps and SPI Interface Description The CAT5401 is four digital POTs integrated with control logic and 16 bytes of NVRAM memory. Each digital POT consists of a series of 63 resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. A separate 6-bit control register (WCR) independently controls the wiper tap switches for each digital POT. Associated with each wiper control register are four 6-bit non-volatile memory data registers (DR) used for storing up to four wiper settings. Writing to the wiper control register or any of the non-volatile data registers is via a SPI serial bus.

Published: Dec 5, 2016 |