Datasheet4U Logo Datasheet4U.com

CAV25020 - EEPROM

Download the CAV25020 datasheet PDF. This datasheet also covers the CAV25010 variant, as both devices belong to the same eeprom family and are provided as variant models within a single manufacturer datasheet.

General Description

The CAV25010/20/40 are a EEPROM Serial 1/2/4

Automotive Grade 1 devices internally organized as 128x8/256x8/512x8 bits.

byte page write buffer and support the Serial Peripheral Interface (SPI) protocol.

The device is enabled through a Chip Select (CS) input.

Key Features

  • Automotive AEC.
  • Q100 Grade 1 (.
  • 40°C to +125°C) Qualified.
  • 10 MHz SPI Compatible.
  • 2.5 V to 5.5 V Supply Voltage Range.
  • SPI Modes (0,0) & (1,1).
  • 16.
  • byte Page Write Buffer.
  • Self.
  • timed Write Cycle.
  • Hardware and Software Protection.
  • Block Write Protection.
  • Protect 1/4, 1/2 or Entire EEPROM Array.
  • Low Power CMOS Technology.
  • 1,000,000 Program/Erase Cycles.
  • 100 Year.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (CAV25010-ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
CAV110 FUEL VALVES Aviaquip
CAV160 FUEL VALVES Aviaquip
CAV170 FUEL VALVES Aviaquip
CAV180 FUEL VALVES Aviaquip
CAV414 Converter Analog Microelectronics

Other Datasheets by onsemi

Part Number Description
CAV25010 EEPROM
CAV25040 EEPROM
CAV25080 SPI Serial CMOS EEPROM
CAV25128 EEPROM
CAV25160 SPI Serial CMOS EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CAV25010, CAV25020, CAV25040 EEPROM Serial 1/2/4-Kb SPI Automotive Grade 1 Description The CAV25010/20/40 are a EEPROM Serial 1/2/4−Kb SPI Automotive Grade 1 devices internally organized as 128x8/256x8/512x8 bits. They feature a 16−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAV25010/20/40 device. These devices feature software and hardware write protection, including partial as well as full array protection. Features • Automotive AEC−Q100 Grade 1 (−40°C to +125°C) Qualified • 10 MHz SPI Compatible • 2.5 V to 5.