CM1630 Datasheet | onsemi

Description The CM1630 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in small form factor UDFN 0.40 mm pitch packages. The CM1630 has ponent values of 8.5 p F - 100 WĂ- 8.5 p F per channel. The CM1630 has a cut-off frequency of 200 MHz and can be used in applications with data rates up to 80 Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic ponents that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15 k V, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30 k V. These devices are particularly well-suited for portable electronics (e.g. wireless handsets, PDAs, notebook puters) because of their small package and easy-to-use pin assignments. In particular, the CM1630 is ideal for EMI filtering and protecting data and control lines for the I/O data ports, LCD display and camera interface in mobile handsets. The CM1630 is housed in space-saving, low-profile 8-, 12- and 16-lead UDFN packages with a 0.4 mm pitch and is available with lead-free finishing. This new small UDFN package provides up to 42% board space savings vs. the 0.50 mm pitch UDFN packages. http://onsemi. UDFN8 DE SUFFIX CASE 517BC UDFN12 DE SUFFIX CASE 517BD UDFN16 DE SUFFIX CASE 517BE ELECTRICAL SCHEMATIC Filter + ESDn- 100 W 8.5 p F 8.5 p F Filter + ESDn- 1 of 4, 6 or 8 EMI/RFI Filter Channels with Integrated ESD Protection - See Package/Pinout Diagrams for expanded pin information. MARKING DIAGRAM Features - Four, Six and Eight Channels of EMI Filtering with Integrated TE MG G P30E MG G P308E MG G ESD Protection - Pi- Style EMI Filters in a Capacitor- Resistor- Capacitor (C- R- C) Network - ±15 k V ESD Protection on Each...