Datasheet4U Logo Datasheet4U.com

CMPWR101 - 250mA SmartOR Regulator

Description

regulator that delivers up to 250 mA of load current at a fixed 3.3 V output.

An internal threshold level (typically 4.1 V) is used to prevent the regulator from being operated below dropout voltage.

Features

  • Automatic Detection of VCC Input Supply.
  • Glitch.
  • Free Output During Supply Transitions.
  • Built.
  • In Hysteresis During Supply Selection.
  • 250 mA Output Maximum Load Current.
  • Fully Integrated VAUX Switch.
  • Overload Current Protection.
  • Short Circuit Current Protection.
  • Operates from Either VCC or VAUX.
  • 8.
  • Pin SOIC Package.
  • These Devices are Pb.
  • Free and are RoHS Compliant.

📥 Download Datasheet

Datasheet Details

Part number CMPWR101
Manufacturer onsemi
File Size 456.85 KB
Description 250mA SmartOR Regulator
Datasheet download datasheet CMPWR101 Datasheet

📁 Similar Datasheet

  • CMPWR101 - 250mA SMARTOR Regulator (California Micro Devices Corp)
  • CMPWR120 - 250mA / 3.3V SmartOR POWER REGULATOR (California Micro Devices)
  • CMPWR130 - 300mA SMARTOR Regulator (California Micro Devices Corp)
  • CMPWR150 - 500mA 3.3V SMARTOR Power Regulator (California Micro Devices Corp)
  • CMPWR160 - USB peripheral Power Management (California Micro Devices Corp)
  • CMPWR025 - Dual Input SmartOR Power Switch (California Micro Devices Corp)
  • CMPWR280 - 1.5A SMARTOR Dual Regulator (California Micro Devices Corp)
  • CMPWR300 - 500mA SMARTOR Dual Regulator (California Micro Devices Corp)
  • CMPWR330 - 400mA SMARTOR Dual Regulator (California Micro Devices Corp)
  • CMP-01 - Industrial Linear (ETC)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
CMPWR101 250 mA SmartORt Regulator with VAUX Switch Product Description The ON Semiconductor’s SmartORt CMPWR101 is a low dropout regulator that delivers up to 250 mA of load current at a fixed 3.3 V output. An internal threshold level (typically 4.1 V) is used to prevent the regulator from being operated below dropout voltage. The device continuously monitors the input supply and will automatically disable the regulator when VCC falls below the threshold level. When the regulator is disabled, a low impedance, fully integrated switch is enabled which allows the output to be directly powered from an auxiliary 3.3 V supply. When VCC is restored to a level above the select threshold, the low impedance switch is disabled and the regulator is once again enabled.
Published: |