These pins are internally pulled up to 5.0 V providing logic ones if left open.
The DAC range is 2.14 V to 3.54 V with 100 mV increments.
VID3 select the d
Key Features
on board, 4.
bit DAC, short circuit protection, 1.0% output tolerance, VCC monitor, and programmable Soft Start capability. The CS5150H is upward compatible with the 5.
bit CS5155H, allowing the mother board designer the capability of using either the CS5150H or the CS5155H with no change in layout. The CS5150H is available in 16 pin surface mount. Features.
Full PDF Text Transcription for CS5150H (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
CS5150H. For precise diagrams, and layout, please refer to the original PDF.
CS5150H CPU 4−Bit Synchronous Buck Controller The CS5150H is a 4−bit synchronous dual N−Channel buck controller. It is designed to provide unprecedented transient respons...
View more extracted text
controller. It is designed to provide unprecedented transient response for today’s demanding high−density, high−speed logic. The regulator operates using a proprietary control method, which allows a 100 ns response time to load transients. The CS5150H is designed to operate over a 4.25−20 V range (VCC) using 12 V to power the IC and 5.0 V or 12 V as the main supply for conversion. The CS5150H is specifically designed to power Pentium® Pro processors and other high performance core logic. It includes the following features: on board, 4−bit DAC, short circuit protection, 1.0% output tolerance, VCC monitor, and programmable
CS5150H Datasheet
