CS52015-3
CS52015-3 is Linear Regulator manufactured by onsemi.
Features http://onsemi.
TO- 220- 3 T SUFFIX CASE 221A 1
3 D2PAK- 3 DP SUFFIX CASE 418AB
Tab = VOUT Pin 1. GND 2. VOUT 3. VIN
- -
- -
- Output Current to 1.5 A Output Accuracy to ±1.5% Over Temperature Dropout Voltage (typical) 1.05 V @ 1.5 A Fast Transient Response Fault Protection
- Current Limit
- Thermal Shutdown
VIN VOUT
3 SOT- 223 ST SUFFIX CASE 318E
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.
CS52015- 3 GND 10 m F 5.0 V
3.3 V @ 1.5 A
DEVICE MARKING INFORMATION
See general marking information in the device marking section on page 6 of this data sheet.
22 m F 5.0 V
Figure 1. Applications Diagram
© Semiconductor ponents Industries, LLC, 2006
September, 2006
- Rev. 8
Publication Order Number: CS52015- 3/D
CS52015- 3
MAXIMUM RATINGS-
Parameter Supply Voltage, VIN Operating Temperature Range Junction Temperature Storage Temperature Range Lead Temperature Soldering: ESD Damage Threshold 1. 10 second maximum. 2. 60 second maximum above 183°C
- The maximum package power dissipation must be observed. Wave Solder (through hole styles only) Note 1 Reflow (SMD styles only) Note 2 Value 7.0
- 40 to +70 150
- 60 to +150 260 Peak 230 Peak 2.0 Unit V °C °C °C °C °C k V
ELECTRICAL CHARACTERISTICS (CIN = 10 m F, COUT = 22 m F Tantalum, VOUT + VDROPOUT < VIN < 7.0 V, 0°C ≤ TA ≤ 70°C, TJ ≤ +150°C, unless otherwise specified, Ifull load = 1.5 A)
Characteristic Fixed Output Voltage Output Voltage (Notes 3 and 4) Line Regulation Load Regulation (Notes 3 and 4) Dropout Voltage (Note 5) Current Limit Quiescent Current Thermal Regulation (Note 6) Ripple Rejection (Note 6) Thermal Shutdown (Note 7) Thermal Shutdown Hysteresis (Note 7) VIN
- VOUT = 1.5 V; 0 ≤ IOUT ≤ 1.5 A 2.0 V ≤ VIN
- VOUT ≤ 3.7 V; IOUT = 10 m A VIN
- VOUT = 2.0 V; 10 m A ≤ IOUT ≤ 1.5 A IOUT = 1.5 A VIN
- VOUT = 3.0 V IOUT = 10 m A 30 ms Pulse, TA = 25°C f = 120 Hz; IOUT = 1.5 A;...
