CS5205A-1 Datasheet PDF - ON Semiconductor 5.0A Adjustable Linear Regulator Specs

CS5205A-1 - 5.0A Adjustable Linear Regulator

Datasheet Summary

Description

Package Pin Number TO 220 3 D2PAK

Function Adjust pin (low side of the internal reference).

Regulated output voltage (case).

Input voltage.

1 1

Features

Output Current to 5.0 A.
Output Trimmed to ±1%.
Dropout Voltage 1.15 V @ 5.0 A.
Fast Transient Response.
Fault Protection Circuitry.
Thermal Shutdown.
Overcurrent Protection.
Safe Area Protection VOUT VIN Thermal Shutdown Bandgap Output Current Limit.
+ Error Amplifier Adj Figure 1. Block Diagram http://onsemi. com 12 3 123 TO.
220.
3 T SUFFIX CASE 221A D2PAK.
3 DP SUFFIX CASE 418AB Tab.

Datasheet Details

Part number	CS5205A-1
Manufacturer	ON Semiconductor
File Size	210.27 KB
Description	5.0A Adjustable Linear Regulator
Datasheet	CS5205A-1 Datasheet
Additional preview pages of the CS5205A-1 datasheet.

📁 Similar Datasheet

CS5205A-1 - 5A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

CS5205-1 - 5A Adjustable/ and 3.3V and 5V Fixed Linear Regulators (Cherry Semiconductor Corporation)

CS5205-3 - 5A Adjustable/ and 3.3V and 5V Fixed Linear Regulators (Cherry Semiconductor Corporation)

CS5205-5 - 5A Adjustable/ and 3.3V and 5V Fixed Linear Regulators (Cherry Semiconductor Corporation)

CS5201-1 - 1A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

CS5201-3 - 1A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)

CS52015-1 - 1.5A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

CS52015-3 - 1.5A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)

CS5202 - CS5202 CMOS (ETC)

CS5203-1 - 3A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

Full PDF Text Transcription

Click to expand full text

CS5205A−1 5.0 A Adjustable Linear Regulator The CS5205A−1 linear regulator provides 5.0 A at an adjustable voltage with an accuracy of ±1%. Two external resistors are used to set the output voltage within a 1.25 V to 13 V range. The regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level. The maximum quiescent current is only 10 mA at full load. The regulator is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.

Published: Jan 16, 2016 |