Datasheet4U Logo Datasheet4U.com

CS5207A-1 - 7.0A LDO 3-Pin Adjustable Linear Regulator

Datasheet Summary

Description

Package Pin Number TO

This pin is connected to the low side of the internally trimmed 1.5% bandgap reference voltage and carries a bias current of about 70 μA.

Features

  • 1.25 V to 5.0 V VOUT @ 7.0 A.
  • Dropout Voltage < 1.0 V @ 7.0 A.
  • 1.5% Trimmed Reference.
  • Fast Transient Response.
  • Thermal Shutdown.
  • Current Limit.
  • Short Circuit Protection.
  • Drop.
  • In Replacement for LT1584 5.0 V VIN VOUT CS5207A.
  • 1 Adj 100 μF 0.1 μF 3.3 V @ 7.0 A 124 Load 200 300 μF http://onsemi. com TO.
  • 220 THREE LEAD T SUFFIX CASE 221A 12 3 PIN.

📥 Download Datasheet

Datasheet preview – CS5207A-1

Datasheet Details

Part number CS5207A-1
Manufacturer ON Semiconductor
File Size 211.59 KB
Description 7.0A LDO 3-Pin Adjustable Linear Regulator
Datasheet download datasheet CS5207A-1 Datasheet
Additional preview pages of the CS5207A-1 datasheet.

📁 Similar Datasheet

  • CS5207A-1 - 7A LDO 3-Pin Adjustable Linear Regulator (Cherry Semiconductor Corporation)
  • CS5207-1 - 7A Adjustable Linear Regulator (Cherry Semiconductor Corporation)
  • CS5207-2 - 7A/ 1.5V Fixed Linear Regulator (Cherry Semiconductor Corporation)
  • CS5207-3 - 7A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)
  • CS5201-1 - 1A Adjustable Linear Regulator (Cherry Semiconductor Corporation)
  • CS5201-3 - 1A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)
  • CS52015-1 - 1.5A Adjustable Linear Regulator (Cherry Semiconductor Corporation)
  • CS52015-3 - 1.5A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)
  • CS5202 - CS5202 CMOS (ETC)
  • CS5203-1 - 3A Adjustable Linear Regulator (Cherry Semiconductor Corporation)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
CS5207A−1 7.0 A LDO 3−Pin Adjustable Linear Regulator The CS5207A−1 linear regulator provides 7.0 A at adjustable voltages from 1.25 V to 5.0 V. This adjustable device requires two external resistors to set the output voltage and provide the minimum load current for proper regulation. This regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V at 7.0 A. This regulator is protected against overload conditions with overcurrent and thermal shutdown protection circuitry.
Published: |