Datasheet4U Logo Datasheet4U.com

FAN7080-GF085 - Half Bridge Gate Driver

General Description

The FAN7080 GF085 is a half

and adjustable dead time control.

It is designed for high voltage and high speed driving of MOSFET or IGBT, which operates up to 600 V.

voltage process and common mode noise cancellation t

Key Features

  • Automotive Qualified to AEC.
  • Q100 and PPAP Capable.
  • Floating Channel for Bootstrap Operation to +600 V.
  • Tolerance to Negative Transient Voltage on VS Pin.
  • VS.
  • pin dv/dt Immune.
  • Gate Drive Supply Range from 5.5 V to 20 V.
  • Under.
  • Voltage Lockout (UVLO).
  • CMOS Schmitt.
  • triggered Inputs with Pull.
  • down.
  • High Side Output In.
  • phase with Input.
  • IN input is 3.3 V/5 V Logic Compatibl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN7080 Half Bridge Gate Driver Fairchild Semiconductor
FAN7080_F085 Half Bridge Gate Driver Fairchild Semiconductor
FAN7080_GF085 Half Bridge Gate Driver Fairchild Semiconductor
FAN7081 High Side Gate Driver Fairchild Semiconductor
FAN7081_F085 High Side Gate Driver Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FAN7083-GF085 High Side Gate Driver
FAN7085-GF085 High Side Gate Driver
FAN7171-F085 High-Side Automotive Gate Driver IC
FAN73611 Single-Channel High-Side Gate Driver
FAN7380 Half-Bridge Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Half Bridge Gate Driver FAN7080-GF085 Description The FAN7080−GF085 is a half−bridge gate drive IC with reset input and adjustable dead time control. It is designed for high voltage and high speed driving of MOSFET or IGBT, which operates up to 600 V. onsemi’s high−voltage process and common−mode noise cancellation technique provide stable operation in the high side driver under high−dV/dt noise circumstances. An advanced level−shift circuit allows high−side gate driver operation up to VS = −5 V (typical) at VBS = 15 V. Logic input is compatible with standard CMOS outputs. The UVLO circuits for both channels prevent from malfunction when VCC and VBS are lower than the specified threshold voltage.