Datasheet4U Logo Datasheet4U.com

FAN9672 - Two-Channel Interleaved CCM PFC Controller

General Description

The FAN9672 is an interleaved two channel Continuous Conduction Mode (CCM) Power Factor Correction (PFC) controller IC intended for PFC pre

regulators.

type power factor correction; the FAN9672 enables the

Key Features

  • Continuous Conduction Mode Control.
  • Two.
  • Channel PFC Control (Maximum).
  • Average Current.
  • Mode Control.
  • PFC Slave Channel Management Function.
  • Programmable Operation Frequency Range: 18 kHz ∼ 40 kHz or 55 kHz ∼ 75 kHz.
  • Programmable PFC Output Voltage.
  • Dual Current Limit Functions.
  • TriFault Detect Protects Against Feedback Loop Failure.
  • Sag Protection.
  • Programmable Soft.
  • Start.

📥 Download Datasheet

Datasheet Details

Part number FAN9672
Manufacturer onsemi
File Size 1.74 MB
Description Two-Channel Interleaved CCM PFC Controller
Datasheet download datasheet FAN9672 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN9611 Interleaved Dual BCM PFC Controllers Fairchild Semiconductor
FAN9612 Interleaved Dual BCM PFC Controller Fairchild Semiconductor
FAN100 Primary-Side-Control PWM Controller Fairchild Semiconductor
FAN102 Primary-Side-Control PWM Controller Fairchild Semiconductor
FAN103 Primary-Side-Regulation PWM Controller Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FAN9673 Three-Channel Interleaved CCM PFC Controller
FAN9611 Interleaved Dual BCM PFC Controllers
FAN1100-F085 Ignition Gate Driver IC
FAN156 Low Voltage Comparator
FAN2001 High-Efficiency Step-Down DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Two-Channel Interleaved CCM PFC Controller FAN9672 Description The FAN9672 is an interleaved two−channel Continuous Conduction Mode (CCM) Power Factor Correction (PFC) controller IC intended for PFC pre−regulators. Incorporating circuits for leading edge, average current, and “boost”−type power factor correction; the FAN9672 enables the design of a power supply that fully complies with the IEC1000−3−2 specification. Interleaved operation provides substantial reduction in the input and output ripple currents and the conducted EMI filtering becomes simpler and cost effective.