Datasheet4U Logo Datasheet4U.com

FL73282 - Half-Bridge Gate Driver

General Description

The FL73282, a monolithic half bridge gate

MOSFETs and IGBTs that operate up to +900 V.

voltage process and common mode noise canceling technique provides stable operation of the high side driver under high

dVS/dt noise circumstances.

Key Features

  • Floating Channel for Bootstrap Operation to +900 V.
  • Typically 350 mA / 650 mA Sourcing/Sinking Current Driving Capability for Both Channels.
  • Common.
  • Mode dv/dt Noise Canceling Circuit.
  • Extended Allowable Negative VS Swing to.
  • 9.8 V for Signal Propagation at VCC = VBS = 15 V.
  • VCC & VBS Supply Range from 10 V to 20 V.
  • UVLO Functions for Both Channels.
  • Matched Propagation Delay Below 50 ns.
  • Built.
  • in 170.

📥 Download Datasheet

Datasheet Details

Part number FL73282
Manufacturer onsemi
File Size 269.55 KB
Description Half-Bridge Gate Driver
Datasheet download datasheet FL73282 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FL75L05A (FL75L05A - FL75L20A) Delphi Series Filter Module Delta Electronics
FL75L07A Delphi Series Filter Module Delta Electronics
FL75L10A (FL75L05A - FL75L20A) Delphi Series Filter Module Delta Electronics
FL75L20A (FL75L05A - FL75L20A) Delphi Series Filter Module Delta Electronics
FL7701 Smart LED Lamp Driver Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FL7701 Smart LED Lamp Driver
FL7733A LED Driver
FL7734 Single-Stage Primary-Side-Regulation PWM Controller
FL7740 Constant-Voltage Primary-Side-Regulation PWM Controller
FL7760 High-Side Sensing Constant Current Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Half-Bridge Gate Driver FL73282 Description The FL73282, a monolithic half bridge gate−drive IC, can drive MOSFETs and IGBTs that operate up to +900 V. onsemi’s high−voltage process and common mode noise canceling technique provides stable operation of the high−side driver under high−dVS/dt noise circumstances. An advanced level−shift circuit allows high−side gate driver operation up to VS = −9.8 V (typical) for VBS = 15 V. The UVLO circuits for both channels prevent malfunction when VCC or VBS is lower than the specified threshold voltage. Output drivers typically source/sink 350 mA / 650 mA, respectively, which is suitable for all kinds of half− and full−bridge inverters.