FNB81060T3 Datasheet | onsemi

Motion SPM) 8 Series FNB81060T3 is a Motion SPM 8 module providing a fully- featured, high- performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built- in IGBTs to minimize EMI and losses, while also providing multiple on- module protection Features including under- voltage lockouts, inter- lock function, over- current shutdown, thermal monitoring of drive IC, and fault reporting. The built- in, high- speed HVIC requires only a single supply voltage and translates the ining logic- level gate inputs to the high- voltage, high- current drive signals required to properly drive the module’s robust shortcircuit- rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Features - UL Certified No. E209204 (UL1557) - 600 V - 10 A 3- Phase IGBT Inverter Including Control IC for Gate Drive and Protections - Low- Loss, Short- Circuit Rated IGBTs - Separate Open- Emitter Pins from Low- Side IGBTs for Three- Phase Current Sensing - Active- high Interface, works with 3.3 / 5 V Logic, Schmitt- trigger Input - HVIC for Gate Driving, Under- Voltage, Over Current and Short- Circuit Current Protection - Fault Output for Under- Voltage, Over Current and Short- Circuit Current Protection - Inter- Lock Function to Prevent Short- Circuit - Shut- Down Input - HVIC Temperature- Sensing Built- In for Temperature Monitoring - Isolation Rating: 1500 Vrms / min. Applications - Motion Control - Home Appliance / Industrial Motor / HVAC Related Resources - AN- 9112 - Smart Power Module, Motion SPM 8 Series User’s Guide Integrated Power Functions - 600 V - 10 A IGBT Inverter for Three Phase DC / AC...