Datasheet4U Logo Datasheet4U.com

FSB50250BS - Motion SPM5

General Description

a fully-featured, high-performance inverter output stage for AC Induction, BLDC and PMSM motors such as refrigerators, fans and pumps.

Key Features

  • including under-voltage lockouts and thermal monitoring. The built-in high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module’s internal MOSFETs. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms. Features.
  • UL Certified No. E209204 (UL1557).
  • Optimized for over 10 kHz Switching.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSB50250 Smart Power Module Fairchild Semiconductor
FSB50250AS Motion SPM5 Fairchild Semiconductor
FSB50250S Smart Power Module Fairchild Semiconductor
FSB50250US Smart Power Module Fairchild Semiconductor
FSB50325 Smart Power-Module Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FSB50450B Motion SPM 5
FSB50450BS Motion SPM 5
FSB50550B Motion SPM 5
FSB50550BS Motion SPM 5
FSB50760BSF SPM-5 module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Motion SPM) 5 Series FSB50250BS Description The FSB50250BS is an advanced Motion SPM 5 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC and PMSM motors such as refrigerators, fans and pumps. These modules integrate optimized gate drive of the built-in MOSFETs (FRFET technology) to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts and thermal monitoring. The built-in high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module’s internal MOSFETs.