Datasheet4U Logo Datasheet4U.com

FSUSB242UCX-Z002 - Type-C USB Port Protection Switch

General Description

CSP Bump Name A1 VDD B1 GND A3 HSD+ A2 HSD B3 HSD1+ C3 HSD1 C2 HSD2+ C1 HSD2

Table 2.

Z Desc

Key Features

  • Fully USB Data Port Protection.
  • VDD 0 V.
  • 5.5 V (12 V DC tolerant).
  • 18 V to +20 V DC Tolerance on HSD± Port.
  • ±25 V IEC 61000.
  • 4.
  • 5 Surge Protection w/o External TVS.
  • VDD Operating Range, 2.7 V.
  • 5.5 V.
  • HSD RON: 5 W Typical.
  • CON = 5 pF Typical.
  • Wide.
  • 3 dB Bandwidth: > 720 MHz.
  • Low Power Operation: ICC < 10 mA (Typical).
  • Over Voltage Protection: 3.6 V & 4.5 V Typic.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSUSB20 Low-Power 1-Port High-Speed USB Switch Fairchild Semiconductor
FSUSB22 Low-Power 2-Port High-Speed USB2.0 Switch Fairchild Semiconductor
FSUSB23 Low Power Hi-Speed USB 2.0 (480Mbps) Switch Fairchild Semiconductor
FSUSB11 Low-Power Full-Speed Switch Fairchild Semiconductor
FSUSB30 Low-Power 2-Port Hi-Speed USB2.0 Switch Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FSUSB104 Low-Power Two-Port Hi-Speed USB2.0 Switch
FSUSB42 USB2.0 UART Switch
FSUSB43 USB2.0 Switch
FSUSB63 3:1 High-Speed USB2.0 Switch/Multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com FSUSB242 Type-C USB Port Protection Switch FSUSB242UCX-Z002 Features • Fully USB Data Port Protection • VDD 0 V− 5.5 V (12 V DC tolerant) • −18 V to +20 V DC Tolerance on HSD± Port • ±25 V IEC 61000−4−5 Surge Protection w/o External TVS • VDD Operating Range, 2.7 V−5.5 V • HSD RON: 5 W Typical • CON = 5 pF Typical • Wide −3 dB Bandwidth: > 720 MHz • Low Power Operation: ICC < 10 mA (Typical) • Over Voltage Protection: 3.6 V & 4.5 V Typical Applications • Smartphones • Tablets • Laptops Safety Mechanisms Highlight • 3.6 V & 4.5 V OVP Trip Point • ±25 V Surge Protection without Need for External TVS VSYS SEL AP/MCU HSD1+ HSD1− HSD2+ PMIC HSD2− FSUSB242 Control & Logic OVP USB HSD Switch USB Type−C Connector HSD+ HSD− GND Figure 1.