Datasheet4U Logo Datasheet4U.com

FXMA2102 - 2-Bit VoltageTranslator / Buffer / Repeater / Isolator

General Description

The FXMA2102 is a high performance configurable dual voltage supply translator for bi

over a wide range of input and output voltages levels.

masters and slaves.

Key Features

  • Bi.
  • Directional Interface between Any Two Levels: 1.65 V to 5.5 V.
  • Direction Control not Needed.
  • System GPIO Resources Not Required when OE Tied to VCCA.
  • I2C 400 pF Buffer / Repeater.
  • I2C Bus Isolation.
  • A/B Port VOL = 175 mV (Typical), VIL = 150 mV, IOL = 6 mA.
  • Open.
  • Drain Inputs / Outputs.
  • Accommodates Standard.
  • Mode and Fast.
  • Mode I2C.
  • Bus Devices.
  • Supports I2C Clock Stretching & Multi.
  • Master.
  • Fully C.

📥 Download Datasheet

Datasheet Details

Part number FXMA2102
Manufacturer onsemi
File Size 403.09 KB
Description 2-Bit VoltageTranslator / Buffer / Repeater / Isolator
Datasheet download datasheet FXMA2102 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FXMA2102 2-Bit Voltage Translator / Buffer / Repeater / Isolator Fairchild Semiconductor
FXMA2104 4-Bit Voltage Translator / Buffer / Repeater / Isolator Fairchild Semiconductor
FXMA108 8-Bit Signal Translator Fairchild Semiconductor
FXMAR2102 2-Bit Voltage Translator / Isolator Fairchild Semiconductor
FXMAR2102 2-Bit Voltage Translator / Isolator onsemi

Other Datasheets by onsemi

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Dual Supply, 2-Bit Voltage Translator / Buffer / Repeater / Isolator for I2C Applications UQFN8, 1.4x1.2, 0.4P CASE 523AS FXMA2102 Description The FXMA2102 is a high−performance configurable dual−voltage−supply translator for bi−directional voltage translation over a wide range of input and output voltages levels. Intended for use as a voltage translator between I2C−Bus complaint masters and slaves. The device is designed so that the A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi−directional A/B port voltage translation between any two levels from 1.65 V to 5.5 V. VCCA can equal VCCB from 1.65 V to 5.5 V. The OE pin is referenced to VCCA. Either VCC can be powered−up first.