Datasheet4U Logo Datasheet4U.com

MAX707 Datasheet (max707 / Max708) Up Supervisory Circuits

Manufacturer: onsemi

Overview: www.DataSheet4U.com MAX707, MAX708 mP Supervisory Circuits The MAX707/708 are cost−effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 20 msec of VCC falling through the reset voltage threshold. Reset is maintained with 200 mS of delay time after VCC rise above the reset threshold. The MAX707/708 have a low quiescent current of 12 mA at VCC = 3.3 V, an active−high RESET and active−low RESET with a push−pull output. The output is guaranteed valid down to VCC = 1.0 V. The MAX707/708 have a Manual Reset MR input and a +1.25 V threshold detector for power−fail input PFI. These devices are available in a Micro8 and SOIC−8 package.

Key Features

  • http://onsemi. com.

MAX707 Distributor

Similar Datasheet

Brand Logo Part Number Description Manufacturer
ART CHIP Logo MAX707 uP Supervisory Circuit ART CHIP
Maxim Logo MAX707 Low-Cost / uP Supervisory Circuits Maxim

More Datasheets from onsemi

Part Number Description
MAX708 (MAX707 / MAX708) UP Supervisory Circuits
MAX1617 SMBus Temperature Sensor with Internal and External Diode Input
MAX1720 Switched Capacitor Voltage Inverter
MAX6501 Ultra Small Temperature Switch
MAX6502 Ultra Small Temperature Switch
MAX803 Very Low Supply Current 3-Pin Microprocessor Reset Monitor
MAX803 Very Low Supply Current 3-Pin Microprocessor Reset Monitor
MAX809 Very Low Supply Current 3-Pin Microprocessor Reset Monitors
MAX810 Very Low Supply Current 3-Pin Microprocessor Reset Monitors
MAX829 Switched Capacitor Voltage Converter