MB1S Datasheet | onsemi

Description The MB family of bridge rectifiers is a 0.5 A rectifier family that achieves high surge current absorption within a very small foot print. Within its small 35 mm2 form factor, the MB family shines in its surge capability. In order to absorb high surge currents, the design supports a 35 A IFSM rating and a 5.0 A2Sec I2T rating. Devices in the family are also rated to breakdown voltages of up to 1000 V. These features make the MB family ideal for small power supplies that need a little extra surge capability. For higher IFAV current ratings, lower profile packaging, or lower VF values, explore the onsemi MDB family of bridge rectifiers. For improved VF and efficiency values in the MB package or even higher surge capability, ask about onsemi’s pending MBx SV family. Features - Low- Leakage - Surge Overload Rating: 35 A peak - Ideal for Printed Circuit Board - UL Certified: UL #E258596 - This Device is Pb- Free and Ro HS pliant DATA SHEET .onsemi. SOIC4 W CASE 751EP MARKING DIAGRAM - + $Y&Z&3 MB- S $Y &Z &3 MB- S - = Logo = Assembly Plant Code = 3- Digit Data Code (Year & Week) = Specific Device Code = 1/2/4/6/8 ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor ponents Industries, LLC, 2007 August, 2021 - Rev. 5 Publication Order Number: MB8S/D MB1S- MB8S ABSOLUTE MAXIMUM RATINGS (Values are at TA = 25°C unless otherwise noted) Symbol Parameter MB1S MB2S MB4S MB6S MB8S Unit VRRM Maximum Repetitive Reverse Voltage VRMS VR IF(AV) IFSM Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Average Rectified Forward Current at TA = 50°C Non- Repetitive Peak Forward Surge Current: 8.3 ms Single Half- Sine- Wave TSTG Storage Temperature Range - 55 to...