Datasheet4U Logo Datasheet4U.com

MC100EP16VS - 3.3V / 5V ECL Differential Receiver/Driver

Description

amplitude.

The device is functionally equivalent to the 100EP16 with an input pin that controls the amplitude of the outputs.

The VCTRL input pin controls the output amplitude of the EP16VS and is referenced to VCC.

Features

  • 220 ps Propagation Delay.
  • Maximum Frequency = > 4 GHz Typical (See Graph).
  • The 100 Series Contains Temperature Compensation.
  • PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V.
  • NECL Mode Operating Range: VCC = 0 V with VEE =.
  • 3.0 V to.
  • 5.5 V.
  • Open Input Default State.
  • Q Output Will Default LOW with Inputs Open or at VEE.
  • These Devices are Pb-Free, Halogen Free and are RoHS Compliant www. onsemi. c.

📥 Download Datasheet

Datasheet Details

Part number MC100EP16VS
Manufacturer onsemi
File Size 167.92 KB
Description 3.3V / 5V ECL Differential Receiver/Driver
Datasheet download datasheet MC100EP16VS Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC100EP111 LOW-VOLTAGE 1:10 DIFFERENTIAL ECL/PECL CLOCK DRIVER Motorola
MC100EP221 LOW-VOLTAGE 1:20 DIFFERENTIAL ECL/PECL CLOCK DRIVER Motorola
MC100EP223 Low Voltage 1:22 Differential PECL/HSTL Clock Driver Motorola Semiconductor
MC100E016 8-Bit Synchronous Binary Up Counter Motorola
MC100E101 Quad 4-Input OR/NOR Gate Motorola

Other Datasheets by onsemi

Part Number Description
MC100EP16VA 3.3V / 5V ECL Differential Receiver/Driver
MC100EP16VB ECL Differential Receiver/Driver
MC100EP16VC 5V ECL Differential Receiver/Driver
MC100EP16VT 3.3V / 5V ECL Differential Receiver/Driver
MC100EP16 ECL Differential Receiver/Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MC100EP16VS 3.3 V / 5 V ECL Differential Receiver/Driver with Variable Output Swing Description The MC100EP16VS is a differential receiver with variable output amplitude. The device is functionally equivalent to the 100EP16 with an input pin that controls the amplitude of the outputs. The VCTRL input pin controls the output amplitude of the EP16VS and is referenced to VCC. (See Figure 4.) The operational range of the VCTRL input is from ≤ VBB (max output amplitude) to VCC (min output amplitude) (See Figure 3). A variable resistor between the VCC and VBB pins, with the wiper driving VCTRL, can control the output amplitude. Typical application circuits and a VCTRL Voltage vs. Output Amplitude graph are described in this data sheet.
Published: |