Datasheet4U Logo Datasheet4U.com

MC100LVEL33 - Divider

General Description

The MC100LVEL33 is an integrated ÷4 divider.

functionally equivalent to the EL33 and works from a 3.3 V supply.

The reset pin is asynchronous and is asserted on the rising edge.

Key Features

  • 630 ps Typical Propagation Delay.
  • 4.0 GHz Typical Maximum Frequency.
  • ESD Protection:.
  • > 4 KV Human Body Model.
  • > 200 V Machine Model.
  • The 100 Series Contains Temperature Compensation.
  • PECL Mode Operating Range: VCC = 3.0 V to 3.8 V with VEE = 0 V.
  • NECL Mode Operating Range: VCC= 0 V with VEE =.
  • 3.0 V to.
  • 3.8 V.
  • Internal Input Pulldown Resistors.
  • Meets or Exceeds JEDEC Spec EIA/JESD78 IC Lat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC100LVEL33 Divider Motorola
MC100LVEL30 Triple D Flip-Flop Motorola
MC100LVEL31 D Flip-Flop Motorola
MC100LVEL32 Divider Motorola
MC100LVEL37 ECL/PECL Clock Fanout Buffer Motorola

Other Datasheets by onsemi

Part Number Description
MC100LVEL30 Triple D Flip-Flop
MC100LVEL31 3.3V ECL D Flip?Flop
MC100LVEL32 2 Divider
MC100LVEL34 Clock Generation Chip
MC100LVEL37 Clock Fanout Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MC100LVEL33 3.3 V ECL ÷4 Divider Description The MC100LVEL33 is an integrated ÷4 divider. The LVEL is functionally equivalent to the EL33 and works from a 3.3 V supply. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flops will attain a random state; the reset allows for the synchronization of multiple LVEL33’s in a system. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.