MC10E196 - PROGRAMMABLE DELAY CHIP

onsemi

General Description

The MC10E/100E196 is a programmable delay chip (PDC) designed primarily for very accurate differential ECL input edge placement applications.

The delay section consists of a chain of gates and a linear ramp delay adjust organized as shown in the logic symbol.

Key Features

http://onsemi. com PLCC.
28 FN SUFFIX CASE 776.

📥 Download Datasheet

MC10E196 programmable delay chip by onsemi - Datasheet Preview

Datasheet Details

Part number	MC10E196
Manufacturer	onsemi
File Size	184.13 KB
Description	PROGRAMMABLE DELAY CHIP
Datasheet	MC10E196 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC10E196	PROGRAMMABLE DELAY CHIP	Motorola
MC10E193	ERROR DETECTION/ CORRECTION CIRCUIT	Motorola
MC10E195	PROGRAMMABLE DELAY CHIP	Motorola
MC10E197	DATA SEPARATOR	Motorola
MC10E101	Quad 4-Input OR/NOR Gate	Motorola

Other Datasheets by onsemi

Part Number	Description
MC10E193	5V ECL Error Detection / Correction Circuit
MC10E195	PROGRAMMABLE DELAY CHIP
MC10E197	5V ECL Data Separator
MC10E101	QUAD 4-INPUT OR/NOR GATE
MC10E104	QUINT 2-INPUT AND/NAND GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

www.DataSheet4U.com MC10E196, MC100E196 5V ECL Programmable Delay Chip Description The MC10E/100E196 is a programmable delay chip (PDC) designed primarily for very accurate differential ECL input edge placement applications. The delay section consists of a chain of gates and a linear ramp delay adjust organized as shown in the logic symbol. The first two delay elements feature gates that have been modified to have delays 1.25 and 1.5 times the basic gate delay of approximately 80 ps. These two elements provide the E196 with a digitally-selectable resolution of approximately 20 ps. The required device delay is selected by the seven address inputs D[0:6], which are latched on chip by a high signal on the latch enable (LEN) control.