Datasheet4U Logo Datasheet4U.com

MC10EP16T - 3.3V / 5V ECL Differential Receiver/Driver

Download the MC10EP16T datasheet PDF. This datasheet also covers the MC100EP16T variant, as both devices belong to the same 3.3v / 5v ecl differential receiver/driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The EP16T is a world

class differential receiver/driver.

The device is functionally equivalent to the EP16 with internal termination resistors.

A 50 W resistor is connected from the D input to the VT pin and from the D input to the VT pin.

Key Features

  • http://onsemi. com.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC100EP16T_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MC10EP16T
Manufacturer onsemi
File Size 182.05 KB
Description 3.3V / 5V ECL Differential Receiver/Driver
Datasheet download datasheet MC10EP16T Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10EP16 Differential Receiver Motorola
MC10E016 8-Bit Synchronous Binary Up Counter Motorola
MC10E101 Quad 4-Input OR/NOR Gate Motorola
MC10E104 QUINT 2-INPUT AND/NAND GATE Motorola
MC10E107 QUINT 2-INPUT XOR/XNOR GATE Motorola

Other Datasheets by onsemi

Part Number Description
MC10EP16 ECL Differential Receiver/Driver
MC10EP16VA 3.3V / 5V ECL Differential Receiver/Driver
MC10EP101 3.3V / 5V ECL Quad 4-Input OR/NOR
MC10EP105 Quad 2-Input Differential AND/NAND
MC10EP11 1:2 Differential Fanout Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MC10EP16T, MC100EP16T 3.3V / 5V ECL Differential Receiver/Driver with Internal Termination Description The EP16T is a world−class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50 W resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC − 2 V) for parallel termination or connect VT and VT pins for 100 W input series termination. Special considerations are required for differential inputs under No Signal conditions to prevent instability. The 100 Series contains temperature compensation. Features http://onsemi.