Datasheet4U Logo Datasheet4U.com

MC10EP52 - 3.3V / 5V ECL Differential Data and Clock D Flip-Flop

Download the MC10EP52 datasheet PDF. This datasheet also covers the MC100EP52 variant, as both devices belong to the same 3.3v / 5v ecl differential data and clock d flip-flop family and are provided as variant models within a single manufacturer datasheet.

Description

flip-flop.

The device is pin and functionally equivalent to the EL52 device.

flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition

Features

  • 330 ps Typical Propagation Delay.
  • Maximum Frequency = u 4 GHz Typical.
  • PECL Mode: VCC = 3.0 V to 5.5 V with VEE = 0 V.
  • NECL Mode: VCC = 0 V with VEE =.
  • 3.0 V to.
  • 5.5 V.
  • Open Input Default State.
  • Safety Clamp on Inputs.
  • Q Output Will Default LOW with Inp.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC100EP52_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MC10EP52
Manufacturer onsemi
File Size 172.90 KB
Description 3.3V / 5V ECL Differential Data and Clock D Flip-Flop
Datasheet download datasheet MC10EP52 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10EP16 Differential Receiver Motorola
MC10E016 8-Bit Synchronous Binary Up Counter Motorola
MC10E101 Quad 4-Input OR/NOR Gate Motorola
MC10E104 QUINT 2-INPUT AND/NAND GATE Motorola
MC10E107 QUINT 2-INPUT XOR/XNOR GATE Motorola

Other Datasheets by onsemi

Part Number Description
MC10EP51 3.3V / 5V ECL D Flip-Flop
MC10EP56 Dual Differential 2:1 Multiplexer
MC10EP57 4:1 Differential Multiplexer
MC10EP58 2:1 Multiplexer
MC10EP01 4-Input OR/NOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MC10EP52, MC100EP52 3.3 V / 5 V ECL Differential Data and Clock D Flip‐Flop Description The MC10EP/100EP52 is a differential data, differential clock D flip-flop. The device is pin and functionally equivalent to the EL52 device. Data enters the master portion of the flip−flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. The differential clock inputs of the EP52 allow the device to also be used as a negative edge triggered device. The EP52 employs input clamping circuitry so that under open input conditions (pulled down to VEE) the outputs of the device will remain stable. The 100 Series contains temperature compensation.
Published: |