MC10H116
MC10H116 is Triple Line Receiver manufactured by onsemi.
Description
The MC10H116 is a triple differential amplifier designed for use in sensing differential signals over long lines and is a functional/pinout duplication of the MC10116, with 100% improvement in propagation delay and no increase in power supply current. For termination information see AND8020.
Features
- Propagation Delay, 1.0 ns Typical
- Power Dissipation 85 m W Typ/Pkg (same as MECL 10K™)
- Improved Noise Margin 150 m V (Over Operating Voltage and
Temperature Range)
- Voltage pensated
- MECL 10K patible
- These Devices are Pb-Free, Halogen Free and are Ro HS pliant
42 53
96 10 7
12 14 13 15
11 VBB-
VCC1 = Pin 1 VCC2 = Pin 16 VEE = Pin 8 When input pin with bubble goes positive it’s respective output pin with bubble goes positive.
- VBB to be used to supply bias to the MC10H116 only and bypassed (when used) with 0.01Ăm F to 0.1 m F capacitor to ground (0 V). VBB can source < 1.0 m A.
The MC10H116 is designed to be used in sensing differential signals over long lines. The bias supply (VBB) is made available to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary.
Active current sources provide these receivers with excellent mon- mode noise rejection. If any amplifier in a package is not used, one input of that amplifier must be connected to VBB to prevent unbalancing the current- source bias network.
The MC10H116 does not have internal- input pull- down resistors.
This provides high impedance to the amplifier input and facilitates differential connections.
Applications:
- Low Level Receiver
- Voltage Level
- Schmitt Trigger
Interface
Figure 1. Logic Diagram
.onsemi.
16 1
20 1
16 1
PDIP- 16
PLCC- 20
SOIC- 16
P SUFFIX
FN SUFFIX
D SUFFIX
CASE 648- 08 CASE 775- 02 CASE 751B- 05
MARKING DIAGRAMS-
MC10H116P...
