Datasheet Details
| Part number | MC12095 |
|---|---|
| Manufacturer | onsemi |
| File Size | 43.99 KB |
| Description | 2.5 GHz Low Power Prescaler |
| Datasheet | MC12095_ONSemiconductor.pdf |
|
|
Overview: MC12095 2.5 GHz Low Power Prescaler With Stand-By Mode The MC12095 is a single modulus prescaler for low power frequency division of a 2.5 GHz high frequency input signal. MOSAIC Vt technology is utilized to achieve low power dissipation of 24 mW at a minimum supply voltage of 2.7 V. On–chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added in parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control input (SW) selects the required divide ratio of ÷2 or ÷4. Stand–By mode is available to reduce current drain to 100 mA typical when the standby pin SB is switched LOW disabling the prescaler.
| Part number | MC12095 |
|---|---|
| Manufacturer | onsemi |
| File Size | 43.99 KB |
| Description | 2.5 GHz Low Power Prescaler |
| Datasheet | MC12095_ONSemiconductor.pdf |
|
|
|
| Brand Logo | Part Number | Description | Manufacturer |
|---|---|---|---|
 |
MC12095 | 2.5 GHz Low Power Prescaler | Motorola |
| Part Number | Description |
|---|---|
| MC12093 | Low Power Prescaler |
| MC12026A | 1.1 GHz Dual Modulus Prescaler |
| MC12080 | 1.1 GHz Prescaler |
| MC100E016 | 8-BIT SYNCHRONOUS BINARY UP COUNTER |
| MC100E101 | QUAD 4-INPUT OR/NOR GATE |
| MC100E104 | QUINT 2-INPUT AND/NAND GATE |
| MC100E107 | QUINT 2-INPUT XOR/XNOR GATE |
| MC100E111 | 1:9 DIFFERENTIAL CLOCK DRIVER |
| MC100E112 | QUAD DRIVER |
| MC100E116 | 5V ECL Quint Differential Line Receiver |