MC14106B - Hex Schmitt Trigger

onsemi

Key Features

Increased Hysteresis Voltage Over the MC14584B.
Supply Voltage Range = 3.0 Vdc to 18 Vdc.
Capable of Driving Two Low.
power TTL Loads or One Low.
power Schottky TTL Load Over the Rated Temperature Range.
Pin.
for.
Pin Replacement for CD40106B and MM74C14.
Can Be Used to Replace the MC14584B or MC14069UB.
NLV Prefix for Automotive and Other.

MC14106B hex schmitt trigger by onsemi - Datasheet Preview

Datasheet Details

Part number	MC14106B
Manufacturer	onsemi
File Size	182.19 KB
Description	Hex Schmitt Trigger
Datasheet	MC14106B Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC14106B	Hex Schmitt Trigger	Motorola
MC1411	High Current Darlington Transistor Arrays	Motorola
MC1411B	High Current Darlington Transistor Arrays	Motorola
MC1412	PERIPHERAL DRIVER ARRAYS	Motorola
MC1412B	High Current Darlington Transistor Arrays	Motorola

Other Datasheets by onsemi

Part Number	Description
MC1413	High Current Darlington Transistor Arrays
MC1413B	High Current Darlington Transistor Arrays
MC14174B	Hex Type D Flip-Flop
MC14175B	Quad Type D Flip-Flop
MC14001B	CMOS Gates

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MC14106B Hex Schmitt Trigger The MC14106B hex Schmitt Trigger is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. These devices find primary use where low power dissipation and/or high noise immunity is desired. The MC14106B may be used in place of the MC14069UB hex inverter for enhanced noise immunity or to “square up” slowly changing waveforms. This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high−impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS ≤ (Vin or Vout) ≤ VDD.