MC14532B Datasheet | onsemi

Features - Diode Protection on All Inputs - Supply Voltage Range = 3.0 Vdc to 18 Vdc - Capable of Driving Two Low- Power TTL Loads or One Low- Power Schottky TTL Load over the Rated Temperature Range - NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - This Device is Pb- Free and is Ro HS pliant MAXIMUM RATINGS (Voltages Referenced to VSS) Rating Symbol Value Unit DC Supply Voltage Range Input or Output Voltage Range (DC or Transient) Input or Output Current (DC or Transient) per Pin - 0.5 to +18.0 Vin, - 0.5 to VDD + 0.5 V Vout Iin, Iout ±10 m A Power Dissipation, per Package (Note 1) PD Ambient Temperature Range 500 m W - 55 to +125 °C Storage Temperature Range Tstg - 65 to +150 °C Lead Temperature (8 Sec Soldering) °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Temperature Derating: “D/DW” Package: - 7.0 m W/_C From 65_C To 125_C This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high- impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS ≤ (Vin or Vout) ≤ VDD. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left...