MC74HC368A - Hex 3-State Inverting Buffer

onsemi

Key Features

Output Drive Capability: 15 LSTTL Loads.
Outputs Directly Interface to CMOS, NMOS, and TTL.
Operating Voltage Range: 2 to 6 V.
Low Input Current: 1 mA.
High Noise Immunity Characteristic of CMOS Devices.
These are Pb.
Free Devices A0 2 A1 4 A2 6 A3 10 A4 12 A5 14 3 Y0 5 Y1 7 Y2 9 Y3 11 Y4 13 Y5 OUTPUT ENABLE 1 1 OUTPUT ENABLE 2 15 PIN 16 = VCC PIN 8 = GND Figure 1. Logic Diagram http://onsemi. com 16 1.

MC74HC368A hex 3-state inverting buffer by onsemi - Datasheet Preview

Datasheet Details

Part number	MC74HC368A
Manufacturer	onsemi
File Size	123.60 KB
Description	Hex 3-State Inverting Buffer
Datasheet	MC74HC368A Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC74HC365	Hex 3-State Noninverting Buffer	Motorola
MC74HC366	Hex 3-State Inverting Buffer	Motorola
MC74HC367A	Hex 3-State Noninverting Buffer	Motorola
MC74HC30	8-Input NAND Gate High-Performance Silicon-Gate CMOS	Motorola
MC74HC32A	Quad 2-Input OR Gate	Motorola

Other Datasheets by onsemi

Part Number	Description
MC74HC365A	Hex 3-State Noninverting Buffer
MC74HC30A	8-Input NAND Gate
MC74HC32A	Quad 2-Input OR Gate
MC74HC373A	Octal 3-State Non-Inverting Transparent Latch
MC74HC374A	Octal 3-State Non-Inverting D Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MC74HC368A Hex 3-State Inverting Buffer with Separate 2-Bit and 4-Bit Sections High−Performance Silicon−Gate CMOS The MC74HC368A is identical in pinout to the LS368. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device is arranged into 2−bit and 4−bit sections, each having its own active−low Output Enable. When either of the enables is high, the affected buffer outputs are placed into high−impedance states. The HC368A has inverting outputs.