Datasheet4U Logo Datasheet4U.com

MC74HC377A - Octal D Flip-Flop

Key Features

  • Output Drive Capability: 10 LSTTL Loads.
  • Outputs Directly Interface to CMOS, NMOS and TTL.
  • Operating Voltage Range: 2.0 to 6.0 V.
  • Low Input Current: 1.0 mA.
  • High Noise Immunity Characteristic of CMOS Devices.
  • In Compliance with the Requirements Defined by JEDEC Standard No. 7A.
  • Chip Complexity: 264 FETs or 66 Equivalent Gates.
  • These are Pb.
  • Free Devices 20 1 http://onsemi. com.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC74HC373A Octal 3-State Non-Inverting Transparent Latch Motorola
MC74HC374A Octal 3-State Non-Inverting D Flip-Flop Motorola
MC74HC30 8-Input NAND Gate High-Performance Silicon-Gate CMOS Motorola
MC74HC32A Quad 2-Input OR Gate Motorola
MC74HC354 8-input Data Selector/Multiplexer Motorola

Other Datasheets by onsemi

Part Number Description
MC74HC373A Octal 3-State Non-Inverting Transparent Latch
MC74HC374A Octal 3-State Non-Inverting D Flip-Flop
MC74HC30A 8-Input NAND Gate
MC74HC32A Quad 2-Input OR Gate
MC74HC365A Hex 3-State Noninverting Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MC74HC377A Octal D Flip-Flop with Common Clock and Enable High−Performance Silicon−Gate CMOS The MC74HC377A is identical in pinout to the LS273. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device consists of eight D flip−flops with common Clock and Enable (E) inputs. Each flip−flop is loaded with a low−to−high transition of the Clock input. Enable (E) is active low. Features • Output Drive Capability: 10 LSTTL Loads • Outputs Directly Interface to CMOS, NMOS and TTL • Operating Voltage Range: 2.0 to 6.0 V • Low Input Current: 1.0 mA • High Noise Immunity Characteristic of CMOS Devices • In Compliance with the Requirements Defined by JEDEC Standard No.