MC74HC4852A Datasheet | onsemi

feature injection current effect control. This makes them especially suited for usage in automotive applications where voltages in excess of normal logic voltage are mon. The injection current effect control allows signals at disabled analog input channels to exceed the supply voltage range without affecting the signal of the enabled analog channel. This eliminates the need for external diode/resistor networks typically used to keep the analog channel signals within the supply voltage range. The devices utilize low power silicon gate CMOS technology. The Channel Select and Enable inputs are patible with standard CMOS outputs. Features - Injection Current Cross- Coupling Less than 1 m V/m A (See Figure 10) - Pin patible to HC405X and MC1405XB Devices - Power Supply Range 2.0 to 6.0 V (HC), 4.5 to 5.5 V (HCT) - In pliance With the Requirements of JEDEC Standard No. 7 A - Chip plexity: 154 FETs or 36 Equivalent Gates - - Q Suffix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These Devices are Pb- Free, Halogen Free and are Ro HS pliant SOIC- 16 D SUFFIX CASE 751B SOIC- 16 WIDE DW SUFFIX CASE 751G TSSOP- 16 DT SUFFIX CASE 948F QFN16 MN SUFFIX CASE 485AW MARKING DIAGRAMS XXXXXXXX AWLYWW XXXXXXX AWLYWWG 1 SOIC- 16 XXXXXX XXXXXX ALYWG G 1 TSSOP- 16 1 SOIC- 16 WIDE XXXX ALYWG G QFN16- - V4851 marking used for NLV74HC4851AMN1TWG XXXXXXX = Specific Device Code = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work...